Body
Angle (Inlet to Outlet) |
: |
1800
|
|
| Connection
Size |
: |
¾”
¾” NPT male threaded according ANSI electroplated
hexagonal M.S. Nipples with rubber cap on the thread nipple
for protection.
|
| Body
Material
|
: |
Die-Cast
Aluminum. |
|
Maximum
allowable operating pressure |
: |
125
psig |
Normal
operating inlet pressure |
: |
50
psig
|
Spring
pressure range |
: |
6”
to 14” w.c. |
Gas
flow capacity |
: |
70
SCFH for 0.6 SP GR natural gas at 30 psig inlet pressure
set at 8” W.C. outlet set pressure .
|
Outlet
spring setting |
: |
8”
w.c
|
Lock
up pressure |
: |
Not
more then 1.5” w.c. above the outlet set pressure of
8” w.c. at 50 psig-inlet pressure.
|
Internal
relief blowing pressure |
: |
6”
to 8” w.c. above outlet set pressure
|
Diaphragm
Material |
: |
Rubber
compound or any equivalent material.
|
| Painting
|
:
|
Whole
body should be painted by admiral gray colour with good finishing.
|
| Emboss
|
: |
All
regulator will embossed the company logo and year of manufacturing. |
| Serial
no |
: |
All
regulators will have successive serial number by punching
at the body. |
