| |
CAPACITIES |
: |
Weight without ballast
Weight with water ballast
Wheel load
Water tank
Rolling width
Capacity
Overall length
Overall height
Overall width
Blade width
Ground clearance
|
3000 kg
5000 kg
750-1250 kg
2000 l
5.83 ft
8 ft
26 Ft
5 ft
12 ft
8 ft
10 inch
|
| |
TYRES |
: |
Size
Max load per wheel
Tread
Nos rear drive
Tyre Diameter
Tyre width
Inflation pressure
Manual air inflation with hose.
|
3.5-16X
2000 kg
Smooth
4
2.50 ft
8 inch
2 to 8 kg/cm2
|
| |
BLADE OSCILLATION |
: |
The blade can be oscillated in 3D i.e. in X,Y,Z direction. Maximum of 16 deg. can be achieve perpendicular to Z-Axis and 8 deg. With X-Y Plane. |
| |
GRADER BLADE |
: |
Blade knife is made of tool steel to maintain sharp cutting edge. The knife is fixed by ½” MS Bolt to blade body. Blade is made of 3/8” inch steel plate re-enforced by 3/4” steel plate ribs.
|
| |
TOEING ARRANGEMENT |
: |
Grader is hooked with a Tractor by an eye bolt to be pulled forward and backward. Inside turning radius 23ft Outside turning radius 28ft
|
| |
AXLE |
: |
The axle is made from 4”X4” MS Steel having drum for double Tyre arrangement.
|
| |
RESTING ARRANGEMENT |
: |
In idle condition the grader shall rest on adjustable leg by power screw in the front. For dismantling the body in two part additional legs will be provided on both the sides at the middle segment.
|
| |
PRINTING
AND COLOR |
:
|
1. Primer as under coat
2. Colored Yellow.
3. Grinding
4. Reflectors for Night Visibility.
|
